Ryu®

To provide almost culletless and long life

To achieve low load scribe and deep penetration cutting wheel.

1. Remarkably reduction of cullet (approx. 80％ down*)
2. High edge strength (approx. 27% UP*)
3. Long life (approx. 200-500%UP*)

* Comparison with conventional products.
* Subject to change by scribe conditions.

Penett®/Micro Penett®

Scribing wheel that can simplify the breaking process of glass breakage (scribe and break)

By penetrating the cracks deeper than ever before, we have achieved breakless and simplified cutting/breaking systems.

• Stable scribing of high-toughness glass, chemically etched glass, and machine-polished glass, with no loss of cut during glass ride-up or cross-cutting.
• Simplification of the breaking process or elimination of the breaking process is possible.
• Supports various variations for brittle materials (silicon, optical glass, etc.)
• Stable scribing on protective films (10 to 50 μm) and substrates with various types of films
• PenettⓇ is available for glass thickness t4mm or thicker, which can be separated with less force than conventional scribing wheels to realize stable yield and high quality.

APIO®

Scribing wheels that can achieve high end-face strength even with cross cutting and internal scribing

This scribing wheel was developed based on a traditional blade, adapted to changes in glass material qualities, and is capable of not only cross and inside scribing, but also achieving high screen strength.[Characteristics]

The mass production perspective (yield rate)

1. Does not cause detachment from the cut line when it gets lodged on the glass edge. Does not detach at crossings.
2. Process Window (scribe load area) is broad.

The quality perspective

1. Glass edge is strong after glass fracturing.
2. Can cut interiors.

The work efficiency perspective

1. Can make a clean cut with one blade, regardless of the properties of the glass.
2. Scribing wheel life-span stabilization.

Normal Wheel

Sharpness trusted by everyone for decades

In addition to cemented carbide, we offer a variety of other materials, such as sintered diamonds, for glass cutting applications.
These products are highly versatile while maintaining stable sharpness.

Glass Cutter

Our high glass cutters with high quality cutting wheels and other hand tools are an easy to use, highly durable line of products resulting from tireless product development.

Our glass cutter holders use the “uniflow system” which only discharges oil when cutting. We promise a magnificently clean cut with this product.

Accessories: Axle (pin)

In order to stabilize the scribe, you can choose from 1 of 3 types: polycrystalline diamond, e-coat, and super hard material.

Mrcs®

The blade and holder are integrated, greatly reducing blade replacement time.
Specifications are printed with a laser marker, making identification management easier.

Holder

A holder for properly maintaining the cutter wheel.
Made with materials and sizes suitable for standard cutting edges.

Mrcs® Solidbow

This tool is mainly developed for cutting resin on the surface of substrates such as touch panels.
Because of its MrcsⓇ shape, it can be easily attached to our equipment equipped with a holder joint for MrcsⓇ.

Linear Cutter

Small design that doesn’t take up space
Suitable for use in the laboratory
Adaptable for different substrate types and thicknesses
Scribes steadily with fixed pressure

Circle Cutter II (CC300)

• Compact design that takes up little space
• Ideal for laboratory use
• Compatible with various substrate types/thicknesses
• Circular size can be set as desired
• Anyone can easily perform stable circular cutting at a constant pressure.